====== Nagios+SNMP ======

===== Descripción =====

Como monitoriar servicios a traves de SNMP

===== Prerequistos =====

En principio solo necesita el plugin de nagios para snmp  nagios-plugins-snmp que provee el comando check_snmp

===== Instalación =====

===== Configuración =====

==== 1. Comandos ====

 define command{\\
        command_name    snmp_ups_stat\\
        command_line    $USER1$/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o 1.3.6.1\\
.2.1.33.1.2.1.0 -w 3 -c 4 -l 'Main Battery Status'\\
}\\
\\
define command{\\
        command_name    snmp_ups_envtemp\\
        command_line    $USER1$/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o 1.3.6.1\\
.4.1.476.1.42.3.4.1.3.3.1.3.1 -l 'environment Temperature' -u 'degree celsius' -\\
w 25  -c 40\\
}\\
\\
define command{\\
        command_name    snmp_ups_capa\\
        command_line    $USER1$/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o 1.3.6.1\\
.4.1.476.1.42.3.5.1.19.0 'Adv. Battery Capacity' -u '%'\\
}\\
\\
define command{\\
        command_name    snmp_ups_current\\
        command_line    $USER1$/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o 1.3.6.1\\
.2.1.33.1.4.4.1.3.1  -l 'Output Current' -u 'Ampere 3~' -w 30 -c 45\\
}\\
\\
define command{\\
        command_name    snmp_ups_volt\\
        command_line    $USER1$/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o 1.3.6.1\\
.2.1.33.1.5.3.1.2.1 -l 'Output Voltage' -u 'Volt 3~' -c 225 -w 230\\
}\\
\\
define command{\\
        command_name    snmp_ups_freq\\
        command_line    $USER1$/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o 1.3.6.1\\
.2.1.33.1.5.1.0 -l 'Output Frequency' -u 'Herz' -w 5 -c 50\\
}\\
 

==== 2. Servicios ====

 define service{\\
   use                             generic-service\\
   host_name                       Liebert-UPS\\
   service_description             Environment-Temperature\\
   check_command                   snmp_ups_envtemp!public\\
   contact_groups                  admins\\
 }\\
  \\
 define service{          \\
   use                             generic-service\\
   host_name                       Liebert-UPS\\
   service_description             Battery-Status\\
   check_command                   snmp_ups_stat!public\\
   contact_groups                  admins\\
 }\\
 \\
 define service{\\
   use                             generic-service\\
   host_name                       Liebert-UPS\\
   service_description             Battery-Capacity\\
   check_command                   snmp_ups_capa!public\\
   contact_groups                  admins\\
 }\\
 \\
 define service{\\
   use                             generic-service\\
   host_name                       Liebert-UPS\\
   service_description             Battery-Output-Freq\\
   check_command                   snmp_ups_freq!public\\
   contact_groups                  admins\\
 }\\
 \\
 define service{\\
   use                             generic-service\\
   host_name                       Liebert-UPS\\
   service_description             Battery-Output-Voltage\\
   check_command                   snmp_ups_volt!public\\
   contact_groups                  admins\\
 }\\
 define service{\\
   use                             generic-service\\
   host_name                       Liebert-UPS\\
   service_description             Battery-Output-Current\\
   check_command                   snmp_ups_current!public\\
   contact_groups                  admins\\
   }\\
\\
 define service{\\
   use                             generic-service\\
   host_name                       Liebert-UPS\\
   service_description             Liebert-UPS-TRAP\\
   is_volatile                     1\\
   check_command                   check-host-alive\\
   max_check_attempts              1\\
   normal_check_interval           1\\
   retry_check_interval            1\\
   active_checks_enabled           0\\
   passive_checks_enabled          1\\
   check_period                    24x7\\
   notification_interval           63072000\\
   notification_period             24x7\\
   notification_options            w,u,c\\
   notifications_enabled           1\\
   contact_groups\\
   }

===== Trucos =====

===== Problemas =====

==== 1. Si el instale_mrtg.sh no le funciona ====

-

===== Referencias =====

- http:%%//%%wiki.nagios.org/index.php/Howtos:snmp -

- http:%%//%%wiki.nagios.org/index.php/Howtos:snmp-apc-smart-ups -- (Esto es lo que se hizo en Davivienda)

FIN

==============================================================

15-Marzo-2006 J.E.Gomez v1.0 Primera version


----

__**Advertencia**__

Este documento es privado y es de u so exclusivo de sus autores y de SKINA TECH. Cualquier uso sin una autorización escrita es contra la ley de derechos de autor y de propiedad intelectual, y será motivo de una acción legal.


----