====== Syslinux ======

===== Descripción =====

Como hacer bootear CUALQUIER cosa. Es un antecesor al UEFI.\\
\\
Se usa para algunas memorias USB y en CDs para poderlos hacer bootear\\


===== Prerequistos =====

===== Instalación =====

\\


===== How to Create a Bootable USB: For Linux =====

**STEP 0:** Your motherboard (BIOS) has to support boot from usb (usb-key or usb-hdd).\\
You don't need to know which of these types your media is though, your BIOS recognizes\\
the usb controller in the device, and this determines usb-key or usb-hdd type.

**STEP 1:** [[https://www.syslinux.org/wiki/index.php?title=Download|Download]] the latest copy of Syslinux and extract it.

**STEP 2:** Open a command prompt and cd to your 'syslinux/linux' folder. Run ./syslinux -i /dev/sdX1\\
replacing X with the device node of your media.

**STEP 3:** Ensure the usb drive is bootable. For that, we need a working MBR code and an active partition.\\
Open a command prompt and cd to your 'syslinux/mbr' folder. Run the following two commands,\\
replacing X with the device node of your usb drive:

<code>
dd conv=notrunc bs=440 count=1 if=mbr.bin of=/dev/sdX
parted /dev/sdX set 1 boot on
</code>

This will write the Syslinux mbr code (mbr.bin) into the master boot record of the drive,\\
and mark first partition as active (bootable). For the second task, you can use fdisk or other\\
disk partitioning tools.

**STEP 4:** Copy a Linux kernel image (like vmlinuz) to the root (/dev/sdX1) of your media.

**STEP 5:** Lastly, create a 'syslinux.cfg' file in the root of your media (/dev/sdX1) and\\
enter any configuration options you need/want.

===== Configuración =====

==== 1. Una accion ====

==== 2. Segunda accion ====

===== Trucos =====

===== Problemas =====

==== 1. ====

-

===== Referencias =====

- http:%%//%%www.syslinux.org/wiki/index.php/HowTos#How_to_Create_a_Bootable_USB:_For_Linux\\
\\
- https:%%//%%www.syslinux.org/wiki/index.php?title=SYSLINUX#How_do_I_Configure_SYSLINUX.3F

FIN


----

__**Advertencia**__

Este documento es privado y es de u so exclusivo de sus autores y de SKINA TECH. Cualquier uso sin una autorización escrita es contra la ley de derechos de autor y de propiedad intelectual, y será motivo de una acción legal.


----

 

<code>
DEFAULT linux
LABEL linux SAY Now booting the kernel from SYSLINUX... 
KERNEL vmlinuz.img 
APPEND ro root=/dev/sda1 initrd=initrd.img
</code>

 

==============================================================

15-Marzo-2006 J.E.Gomez v1.0 Primera version