Network Load Balancing

-

- http://blog.taragana.com/index.php/archive/how-to-load-balancing-failover-with-dual-multi-wan-adsl-cable-connections-on-linux/ –

-

FIN

#!/bin/sh# by skina##IP address of external interfaces. This is not the gateway address.IP1=192.168.69.10IP2=`ifconfig ppp0 | head -n 2 | tail -n 1 | cut -d: -f 2| awk '{print $1}'`#Gateway IP addresses. This is the first (hop) gateway, could be your router IP#address if it has been configured as the gatewayGW1=192.168.69.1GW2=10.64.64.64NET1="192.168.69.0/24"NET2="10.64.64.64/32"DEV1=eth0DEV2=ppp0# Relative weights of routes. Keep this to a low integer value. I am using 4# for TATA connection because it is 4 times fasterW1=2W2=1# Broadband providers name; use your own names here.NAME1=etbNAME2=tigo################### --------- ahora si hagaleroute del -net defaultecho "ip route add $NET1 dev $DEV1 src $IP1 table $NAME1"ip route add $NET1 dev $DEV1 src $IP1 table $NAME1echo "ip route add default via $GW1 table $NAME1"ip route add default via $GW1 table $NAME1echo "ip route add $NET2 dev $DEV2 src $IP2 table $NAME2"ip route add $NET2 dev $DEV2 src $IP2 table $NAME2echo "ip route add default via $GW2 table $NAME2"ip route add default via $GW2 table $NAME2echo "ip rule add from $IP1 table $NAME1"ip rule add from $IP1 table $NAME1echo "ip rule add from $IP2 table $NAME2"ip rule add from $IP2 table $NAME2echo "ip route add default scope global nexthop via $GW1 dev $DEV1 weight $W2 nexthop via $GW2 dev $DEV2 weight $W2"ip route add default scope global nexthop via $GW1 dev $DEV1 weight $W1 nexthop via $GW2 dev $DEV2 weight $W2

15-Marzo-2006 J.E.Gomez v1.0 Primera version

Advertencia

Este documento es privado y es de u so exclusivo de sus autores y de SKINA TECH. Cualquier uso sin una autorización escrita es contra la ley de derechos de autor y de propiedad intelectual, y será motivo de una acción legal.